REVISED 11-05-18
PAGE 2 OF 3
13/16"
BEVEL EDGE DOOR
UNIVERSAL OR
SQUARE EDGE DOOR
BORE
5-3/8"
4-3/8"
6-5/8"
8-5/8"
(4) 1/4" DIA.
THRU HOLES
5/32"
2-1/8" DIA.
THRU HOLE
1-1/8"
CL
LOCK
&
STRIKE
BACK SET
13/16"
2-1/4"
7"
5"
2-3/4"
3-3/4"
BACK SET
DEPTH OF BORE
DOOR LATCH PROVISIONS
DEPTH
OF
BORE CHART
SEE DEPTH OF
1-1/8" DIA. (MIN)
DRILL FOR #8
WOOD SCREW
(2 PLACES)
LR6000-2-03.DWG
LR6000
[0.900]
29/32"
[1.800]
1-51/64"
[1.800]
1-51/64"
[0.900]
29/32"
[] = DECIMAL DIMENSION
2-1/4"
13/16"
13/16"
BACK SET
#8-32
TAPPED HOLE
(2 PLACES)
1-1/8"
1" DIA. HOLE REQUIRED, 2 PLACES
"HOLE" IN REINFORCEMENT
2-1/8" DIA.
THRU HOLE
5/32"
REINFORCEMENT BY
DOOR MFG.
7"
5"
2-3/4"
3-3/4"
BACK SET
UNIVERSAL OR
SQUARE EDGE DOOR
BEVEL EDGE DOOR
1" DIA. HOLE
(THRU ALL
SUPPORTS)
[0.900]
29/32"
[1.800]
1-51/64"
[1.800]
1-51/64"
[0.900]
29/32"
(4) 1/4" DIA.
HOLES BOTH SIDES
CL
LOCK
&
STRIKE
WOOD DOOR
METAL DOOR
[] = DECIMAL DIMENSION
EDGE GUARD NOTE:
WHEN PREPING THE DOOR
FOR THE BACKSET,
DETERMINE IF THE DOOR
WILL RECEIVE AN EDGE
GUARD, IF SO, THE EDGE
GUARD SHOULD BE
INSTALLED FIRST AND
THEN THE PREP FOR THE
LATCH BACKSET SHOULD
BE MEASURED FROM THE
OUTSIDE EDGE OF THE
EDGE GUARD.
DOOR PREP INFORMATION:
1. BACKSET DIMENSION FROM LOW EDGE OF BEVEL.
2. CENTER PUNCH ALL HOLES.
3. DRILL HOLES (FOR HOLLOW METAL DOORS,
DO NOT DRILL THRU. CENTER PUNCH & DRILL
HOLES FROM BOTH SIDES OF DOOR).
ADA
RECOMMENDED
HEIGHT 44" FROM
FINISHED FLOOR
TO CENTER LINE
-OR-
CHECK LOCAL ORDINANCE
FOR PROPER HEIGHT
USE PROVIDED ORIGINAL FULL SCALE
TEMPLATE TO PREP THE DOOR
VERIFY BACKSET
CENTER LINE
LR6000 PUSH/PULL LATCH - DOOR PREP
c