7
6
4.1
Press the MENU button to enter the
submenu. Device name displayed on the
screen. Go to the APP
to change only
applicable
to an app-controlled
dehumidifier.
Press the MENU button to
confirm selection and advance to the next
screen.
4.2
Display the working hours of this time.
Press the MENU button to confirm selection
and advance to the next screen.
4.3
The
screen displays the Coil temp.
Press the MENU button to confirm selection
and advance to the next screen.
4.4
Wi
fi
Hotspot: Factory setting is "OFF",
press “set button” to enable Wi fihotspot and
switch ON/OFF. The device can transmit
data and receive APP commands. The icon
flickers
when connected
to the main
interface. After a successful connection, the
icon displays normally. Only applicable to
APP-controlled
dehumidifier.
Press
the
MENU button to confirm selection
and
advance to the next screen.
Storm Pro Dehumidifier
BTID: XXXXXXXXXX
see
app to change
“app name”
JOB HOURS
9999
Hold
to Reset
COIL TEMP
-15
℃
BLUE TOOTH
Press
to change
On
Off
4.6
Press the Set button to toggle the
temperature
units between
℉
and
℃
.
Press the MENU button to confirm selection
and advance to the next screen.
4.7
Press the “Set button” to switch GPP
units between gr/lb. or gr/kg. Press the
“MENU button” to confirm the selection and
advance to the next screen. GPP= Grains
per pound (GR/LB)
4.8
Press the “Set button” to adjust the set
point RH% in 5% increments ranging from
25 to 80% RH. and then
loop back to CO. Adjust
to CO mode,
dehumidifier
always running.
Press the
“MENU button” to confirm selection and
advance to the next screen.
4.5
Press the “power button” to turn off the
dehumidifier,
the dehumidifier
will go
through a shutdown cycle.
The shutdown
cycle can be adjusted
according to "Settings", and the shutdown
cycle can be adjusted from 3 minutes to 20
minutes to better drain the water.
POWER DOWN
System Shutdown
In 10:59
POWER DOWN TIME
10
Min
Press
to change
TEMP UNITS
Press
to change
℉
℃
MOISTURE CONTENT
UNITS
Press
to change
IB
KG
HUMIDISTAT
SETPOINT
Press
to change
00
“CO”
indicates continuous mode
4.9
The display prompts the user that the
defrost cycle is in progress
The defrosting status is displayed on the
main interface as a flashing icon until the
defrosting ends and the defrosting lamp
disappears. In the meantime, please wait
patiently for the machine to finish frosting.
DEFROSTING
Defrost Shutdown
In 06:00
00
Set
80
60
93
80
60
93
000
JOB HRS
000
LIFE HRS
5.0
The
compressor
is in a protective
condition. During this period, please be
patient and wait for the countdown to end.
The dehumidifier will automatically turn on
after the countdown.
-9-
RESTARTING
Compressor ready
In 03:00
6
7
