Start-up
Start/Stand-by screen
When the control panel is connected to the power supply,
after a few seconds a start screen is displayed.
Select setting level
•
Tap the rotary push button (8).
The display shows the setting level. The first icon flashes.
•
Use the rotary push button (8) to select the icon in the
menu line (3).
•
Tap the button to go to the setting level.
•
Select the desired temperature with the rotary push
button (8).
•
Tap the rotary push button (8) to confirm the value.
Change room temperature
Change hot water level
•
Use the rotary push button (8) to select the icon in the
menu line (3).
•
Tap the button to go to the setting level.
•
Select the desired hot water level with the rotary push
button (8).
•
Tap the rotary push button (8) to confirm the value.
•
Use the rotary push button to select the icon in the
menu line
•
Tap the button to go to the setting level.
•
Select the desired energy mode with the rotary push
button
•
Tap the rotary push button to confirm the value.
•
Only 2 Options will ever be used (a) GAS
€
Ele2
Select energy mode
Содержание Zefiro 685
