Abelko UltraBase20 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 70

Abelko UltraBase20 Скачать руководство пользователя страница 7

1.1 Other Manuals

Configuration manual:

information on how to configure the system.

Reference manual:

more detailed technical information and script programming.

Quick start guide:

information on how to quickly get the system up and running.

All manuals are available for download at www.abelko.se

1.2 Warranty

1. Abelko will repair any design, material and manufacturing defects at its own expense, provided

they occur during normal use and the purchaser submits a claim within 60 months of the veri‑
fied delivery date. The purchaser is responsible for removal, re‑installation and for paying trans‑
port costs to Abelko, and Abelko will repair the defect and return the equipment free of charge
to the purchaser.

2. The warranty only covers design, material and manufacturing defects. Abelko is not responsible

for defects caused by a failure to follow the instructions, or defects resulting from normal wear
and tear, poor maintenance, unauthorized work, noncompliant operating conditions, incorrect
installation or repairs not carried out by Abelko or an authorized agent, voltage surges or other
electrical faults.

3. Abelko’s responsibility for defects is limited to the circumstances described above. Abelko is

not responsible for any consequential damage that may occur as a result of design, material
and manufacturing defects. The purchaser is therefore not entitled to use defects as grounds
for compensation or any other claim, except in the circumstances described above, nor may
such claim be made against any third parties responsible for fulfilling this warranty.

4. Abelko is not responsible for restoring any configurations, etc. added by the purchaser. The

purchaser should create a backup of configurations and save them to a server.

The information in this document is the property of Abelko Innovation. The content is confidential

and unless you have Abelko Innovation’s written permission, you may not disclose it to anyone except

Abelko Innovation personnel, resellers, agents or licensees. You may not copy parts of the document

or save it to data media or other media, including photocopying or recording, unless you have the
permission of the copyright holder, Abelko Innovation.

AbelkoInnovationmakesno guaranteesin respectofthe contentofthis document. AbelkoInnovation

also retains the right to alter, add or remove parts of the document at any time and without notice.
Reasons for doing so include printing errors, incorrect information and software/product improve‑
ments. Any such changes will always be included in new editions of this document.

All rights reserved.

6

«
...
5
6
7
8
9
...
»

Содержание UltraBase20







































































Отзывы:

Нет отзывов