1-12
Section 1: Introduction
Start Here
Index
Contents
Channel Select Buttons
The Channel Select buttons include
GLOBAL
,
1A
,
1B
,
2A,
and
2B
. They are
the red buttons on the left side of the Control Panel, below the menu display.
1A
and
1B
are twin channel number 1.
2A
and
2B
comprise the second
(optional) twin channel. The global channel affects every channel equally. Press
a Channel Select button to light its LED and make it the active channel. The
menus reflect the status of the active channel, and any changes you make in the
menus affect the active channel.
The LED displays above and below the A Channel Select buttons read
VIDEO
to indicate that these channels are video channels. The displays above and below
the B Channel Select buttons can be either
VIDEO
or
KEY
, depending on how
you have configured your channels. See the discussion at the end of this section
for more details on configuring channels.
When a channel is designated as the “master,” its settings appear in the menus.
You can have more than one channel active at a time, but only one channel can
be the “master” channel. Though the menus reflect the master channel's set-
tings, any changes you make in the menus affect all active (selected) channels.
Hold a Channel Select button for half a second to designate it as the master
without de-selecting other channels. Double press a Channel Select button to
select it as the master channel and de-select all other channels. You can toggle
any other channel on and off after designating a master channel by pressing its
Channel Select button once.
DVEOUS
1A
GLOBAL
1B
2B
2A
VIDEO
KEY
