Micro Tracker User Guide FW1.6 V1.1
Page 4 of 17
11 October 2018
Company Confidential
–
restricted distribution
3
Installation
3.1
Getting started
➢
Charge your device using a micro USB cable. While charging the white led is ON. When the
battery is fully charged the white LED goes OFF.
➢
A long press is needed to turn ON the device (starting in motion tracking mode in standard
configuration).
➢
Your network can use two activation modes:
o
OTAA (Over The Air Activation) that requires the following keys to make the join: DEVEUI,
APPEUI and APPKEY for each device. (the most used)
o
ABP (Activation by personalization) that requires the following keys to make the join:
DEVEUI, DEVADDR and NWKSKEY for each device
➢
Depending on your operator, some actions need to be done to activate the transfer of the
data through Abeeway servers. Please refer to your vendor for more information.
3.2
Fixation
The device can be attached with the provided lanyard or placed in bag, or inside an asset.
Note: the environment and orientation of the tracker can influence the radio performance. For
optimum results keep the zone around the antenna area clear from any conducting material or
magnetic field.
Blue LED
Button
Lanyard
White Charge LED
Micro USB
Antennas area
