Abee V31, Руководство пользователя

Страница: 8 / 15

6
V31 Manual
Disassembly
1. To disassembly the device from the bracket: Hold the bracket firmly and
turn the device in clockwise direction.
2. To remove the bracket: pull up the suction plate button and remove the
bracket from the windshield.
Installation recommendations
1. Install your product as close as possible to the rear view mirror in your car
to get the best view. (as in picture)
2. The lens should be in the area that windshield can be cleaned by your
wipers to get good images on a rainy day.
3. Do not install your product in a place that may interfere with operation of
the air bags in your car.
4. Do not place your product in a position that may be blocked by the heat
insulation.
5. Clean the bracket suction plate before installation.
Warning
Do not install Abee products over an air bag cover or within the air bag
deployment zone. The company assumes no responsibility of liability for injury
or death as a result of car crashes and/or air bag deployment.