The Solo Pure Water System Operation and Maintenance Manual - 7
abc Window Cleaning Supply warrants
new water purification systems against
manufacturing defects under normal use to
the original purchaser.
abc Window Cleaning warrants new
equipment for one year from the original
purchase date to be free from manufacturer
defect. Any parts sent out for warranty are
warranted from the original purchase date of
the machine.
The customer must first contact abc Window
Cleaning to notify them of the problem. abc
may require the merchandise to be shipped
back to them at the customer’s expense to
evaluate the warranty claim. If the equipment
is found to be a manufacturer defect abc
Window Cleaning will reimburse shipping
expense and parts will be sent out at no
charge including standard ground shipping.
Rush shipping will be the sole responsibility
of the customer.
Wear items exempt from warranty include
filters and membranes.
This warranty does not apply to misuse or
abuse causing failure of the system. The
customer must contact abc Window cleaning
before attempting any repairs or modification
to the system. Failure to do so will void your
warranty.
abc Window cleaning holds no responsibility
for loss of labor, time or any costs associated
with using the equipment. abc Window
Cleaning holds the sole discretion of whether
a claim falls under warranty.
1. Strong bypass flow is normal during system operation.
This water is the bypass water and it contains a very high
TDS. This water is non-potable but is also not harmful to
plants. Do not drink bypass water.
3. Milky white bypass flow is a common occurrence when
starting up the system or using a new RO membrane. It is
trapped air being pushed out of the filter housing and will
stop once the air is gone.
1. With the source water off, check that the fitting is
properly tightened. Tighten until you feel the gasket
engage. All fittings are leak free hand tightened.
Do not overtighten.
2. Unscrew the leaky connection. Check the gasket in the
female fitting for damage or deformation. Replace
gasket if necessary. Replace gasket before tightening
fitting. Wrench can cause damage if over tightened.
3. Check brass fittings for damage or deformation. If
necessary replace brass fittings. Replacement parts
can be ordered from ABC or bought from a local store.
The plastic hole size is ½” national pipe thread (NPT)
and the Brass fitting connection is a standard ¾”
Garden hose thread (GHT). Fittings should be attached
with an adhesive to prevent leaks. We recommend
Liquid Nails Perfect Glue from Home Depot.
Expressed Warranty
Returns
No returns are accepted on this unit. The
consumable nature of this system does not
allow for us to take returns.
www.abcWindowSupply.com
12371 Mead Way, Littleton, CO 80125
1.800.989.4003
©abc Window Cleaning Supply, Inc.
Replacement Parts
Optional Upgrades
Replacement Handle
Bypass Hose
TDS Meter
Rubber Feet
Shut-off Valve
Saddle Clamp
TS-Handle
WF2200-BHA
HMTDS-3
WF7000-RF
WF601311
TA-2200-FOOT
Pressure Gauge
10’ Source Hose
Booster Pump
TA-PG
WF612010
WF1000-BP
Hose Reel
112-3-50-100H
Photon DI Only System
TS2300