Step 4 – Connect Bypass to Fleck Meter
1. Apply silicone lube to the 2 ‘o’-rings on the
valve and make connection. We also recom
-
mend applying silicone to the inside of the
female end on the bypass valve.
2. Position metal clips to clamp over the con
-
nection point and fasten with screw. Because
the connection is O-ring sealed, it’s important
not to overtighten the screw. Overtightening
will cause damage to the plastic assembly.
Meter & Valve Assembly
Step 5 – Connect Yoke to Bypass
1. Apply silicone lube to the 2 ‘o’-rings on the
male connection on valve. Again, we also rec
-
ommend applying silicone to the inside of the
female end of the yoke prior to connecting.
2. Position both metal clips to clamp over the
connection point and fasten screw. Remem
-
ber not to over tighten screws.
