ABC-Products Pele, Инструкция по эксплуатации

Страница: 32 / 40

It is recommendable to trim the camera height with regards to the
tilt axis.
You will receive the best results, if you trim the balance point of the
camera in accordance to the height of the tilt axis.
To do so, unfasten the adjusting screw and unhitch the gearwheel.
Now, you can freely tilt the camera.
Open the height fixation and the trim tube fastener. With the trim
wheel, you can continuously adjust the height of the camera plat-
form.
(Hint: When you open the trim tube fastener, the camera might tilt
into an oblique angle and block the trim wheel. Relieve the camera
platform by lifting the camera a bit)
10
Trim Around Pan Axis
Example A (O.K.)
Balance point of the camera is level
with the height of the tilt axis. When
the gearwheel is unhitched, the ca-
mera comes to a stand at any oblique
angle.