ABC-Products HandyMan DV, Инструкция по эксплуатации

Страница: 21 / 28

Bedienungsanleitung // Instruction Manual: HandyMan DV (06/06) 17
b) Place the trim-rod onto the docking head
c) Find the center of gravity of the camera (you may place a pencil under the camera
to do this, let the camera balance on the pencil). Mount the camera plate onto the
camera plate so the plate is in the center of gravity of the camera.
Center of gravity
d) Place weight at the bottom of the balancing rod. Put the safety pin into the hole at
the bottom of the rod. Carefully mount the camera onto the camera plate holder and
tighten it by turning the red fore-aft screws holding both ends. Make sure the camera
plate is well tight, this will avoid the camera from falling off the system.