background image

4

IDEAL 4107;  IDEAL 4109

1. General

This instruction manual will help you to learn the
safe and comfortable operation of  this machine.
Please carefully read and observe the operating
instructions and safety instructions. This
information applies to both models when no
reference is made.  After use place the instruction
manual in the pocket provided (1).

1.1 Safety Instructions    

Danger!

Non-compliance with the instructions may

endanger persons.

Warning!

Non-compliance with the instructions may

cause damage to the machine.

The operating instructions must always be
available for the operator.

All components which may endanger the operator
are covered by a guard or have a door. The guard
is screwed on and the door has a switch.

Operation by one person at a time only.

1.2 Application

The machine is constructed for shredding
crumpled paper, stacks of paper and cardboard
boxes (including staples). Due to reasons of
disposal shredding of plastic foils amongst the
paper should be avoided.

Danger!

Children must not operate the machine.

Danger!

Do not shred any strapping materials or fluids
or materials which may explode, chemically
react or splinter.

Warning!

Feeding of big steel components, screws,

nails or hard components will damage the
cutting mechanism.

IDEAL 4109

IDEAL 4107

1-800-658-8788  -  www.abcoffice.com

Содержание IDEAL 4107 CC


















Отзывы: