Assembly Picture
STEP THREE: Firmly press fit the stems of 5
casters into holes on the underside of the
base. Fit bottom of gas lift into hole of base
as shown.
STEP FOUR: Fit top of gas lift into
corresponding hole on the bottom of the seat
assembly as shown.
NOTE : Finalize assembly by sitting heavily
on the chair a few times. This will secure all
the component connections.
Assembly Instruction
STEP TWO: Attach armrests to seat as
shown. Secure armrests with 4 long bolts, 8
spring washers, using an allen wrench.
STEP ONE: Attach seat adjuster to seat as
shown. Make sure arrow on adjuster points
toward the front edge of the seat. Secure
adjuster with 4 short bolts and 4 flat washers
as shown, using an allen wrench.
Step 1
A
B
H I
J
Step 2
G
G
J
Step 3
E
D
C
Step 4
NOTE: Make
sure arrow on
adjuster points
towards front
edge of seat
B
E
C
F
F
2
