Abbra Home Control, Быстрый старт

Страница: 9 / 19

few settings to best suit your needs, and
then you can begin using it. To program
your system, please log into your account
at
www.nextalarm.com and click
“Program Panel”, or follow these
instructions.
Open the Ab
bra’s front door, exposing
the keypad. Press <Next Item> until the
screen displays “User Settings”. Press
<View/Select >, then type in your master
code. The User Settings mode is
operated through a system of menus.
The buttons on the keypad are used to
navigate through these menus. To the
right is a list of all items on the User
Settings menu.
-
The < Next Item > button is
used to move to the next item on a
menu.
- The < View/Select > button is
used to select the current item, and
also to confirm the contents of an
item if you have entered new
settings.
-
The < Back > button is used to
move back to the previous item on a
menu.
- The < Home > button is used to
exit from a selected item to the
previous menu.
-
The < Away > button is used to
exit the User Settings mode entirely,
and return the Abbra back to its
normal operating mode.
Press <
Next Item > until User Settings is
displayed on the LCD screen, and then
press <
View/Select >. The Abbra will
now speak “Please Enter Code”, and a
flashing cursor will appear on the screen.
The Abbra is asking you to enter in your
Master User Code, which you will be
choosing soon. Right now, it is set to
1 1
1 1 , so type that in, and the Abbra will
beep several times and display Set
Bypass , the first item on the User
Settings menu. Press < Next Item > until
Set User Codes is displayed, then press
< View/Select >.
The screen will now display User Code
1 . This is the Master User Code, and
since 1 1 1 1 , is not very secure, the first
thing you should do is change it to a new
number. Press <
View/Select >. Now you
should think of a new Master User Code.
The code needs to be four digits, and,
like your bank PIN number, should be
one that is not easy to guess. Type in
the new Master User Code, then press
<
View/Select > twice. You need to press
it twice because you have changed the
contents of this menu item. The screen
will now display
User Code 1 again. You
can either press < Next Item > to move to
User Code 2 and set it in the same way,
or you can press < Home > to move back
to the User Settings main menu. You
can
also press < Away > then
< View/Select > to exit the User Settings
mode entirely.
At this point, the Abbra is ready to use. If
you like, you can use the User Settings
menu to do other things, such as bypass
zones, set the Abbra’s internal clock, or
add
new keychain remote control
transmitters , using the < Next Item > and
< View/Select > keys just like you did to
set the user codes. You can use your
new Master User Code to access this
menu any time the Abbra is disarmed.