Abbott MER3700, Руководство пользователя

Страница: 20 / 40

16
Data Export. Data Export applies to data that displays patient information, such as screen
captures, data base records, and pdf reports. Data Export is nominally set to encrypt exported
data (see Personal Identification Number). Session Records and Programmer Logs are
automatically encrypted, and only Abbott Medical personnel can access the data.
You can view Data Export settings in Preferences from the Tools menu To adjust the patient data
export setting, contact Technical Support.
Personal Identification Number (PIN). To export data you must create a Personal Identification
Number. The PIN cannot:
 Repeat a number six times in succession, for example 555555
 Have consecutive numbers in either ascending or descending order, for example 123456 or
654321
NOTE: Be sure to document the PIN selected. The PIN will be required later to access the
data from the flash drive.
Input Devices
Keyboard. A USB keyboard can be connected to any of the six USB ports for use in conjunction
with the on-screen keyboard.
Mouse. A USB mouse can be connected to any of the six USB ports for use in conjunction with
the on-screen keyboard while in the presence of a patient. Do not use a third-party device that
enables long range control to send remote mouse input, for example over the Internet. For a list of
compatible mice, contact your Abbott Medical representative or Technical Support (page 2).
ECG Input Cable. The ECG Input Cable, supplied by your Abbott Medical Representative, can be
used to display an ECG waveform generated by an external ECG device on the Merlin™ 2 PCS.
See the Accessories table (page 30). Plug the cable's 6-pin connector into the ECG IN port in the
back of the Merlin 2 PCS, and the 3.5 mm mini-plug into the Signal Out port on the external unit.
NOTE: For the best display, select Lead 1 from the ECG Configuration window on the Merlin
2 PCS.
Output Devices
Video Out. The screen display of the Merlin™ 2 PCS can be sent to a video monitor that supports
HDMI capabilities for use while in the presence of a patient. Connect one end of the video cable
into the HDMI port on the rear of the Merlin 2 PCS, and plug the other end into the monitor port.
External Printer. The Merlin 2 PCS can print to some external printers with USB connectors. For
a list of compatible printers, contact Technical Support (page 2).
1.
Connect the printer's USB cable to any of the six USB ports on the Merlin 2 PCS.
2. Turn on both the printer and the Merlin 2 PCS.
3. On the Merlin 2 PCS screen, select the Tools button.
4. On the drop-down menu, select the Preferences button, then select the Printer tab.
5. Under "Selected Printer," select the External & PDF button.
6. Close the window and begin the device session.