![background image](http://html1.mh-extra.com/html/abbott/freestyle-navigator-ii/freestyle-navigator-ii_user-manual_450953015.webp)
25
26
How to Clean your Transmitter
The Transmitter should be removed from the Sensor Support Mount and
cleaned each time you remove a used Sensor (every 5 days) .
1. Wash the Transmitter with mild soap and water .
2. Rinse the Transmitter thoroughly under
running water .
3. Dry the Transmitter thoroughly with a clean,
soft, lint-free cloth or paper towel .
• Shake and blot any water out of the
Transmitter’s contact points .
4. Make sure that the contact points are dry and clean . Check for
apparent signs of damage such as bent contact points .
How to Clean your Receiver
1. Wipe the outside of your Receiver with a clean, soft, lint-free cloth or
paper towel lightly dampened with either a mild soapy solution or
70% isopropyl alcohol . Always be careful not to get water or any
other substance in the USB or test strip ports .
2. Use a clean, soft, lint-free cloth or paper towel to
remove any remaining soap or alcohol .
Contact Points
117
mg/dL
320
180
40
12 May 2012
Graph
14:30
Menu
CAUTIONS:
• Do NOT immerse the Receiver in water or any other liquid . Avoid
getting water or any other substance in the USB and test strip ports .
• Do NOT clean your Receiver with steam .
• Do NOT use adhesive remover wipes or solutions containing ether
or ether-containing components for cleaning or removing residual
adhesive from the Transmitter or Receiver . These solutions can
damage the casings of the Transmitter and Receiver .
How to Clean your Receiver Skin
1. Remove the Receiver Skin .
2. Wash the skin in mild soap and water and dry thoroughly .
3. Check to make sure the inside of the skin
is completely dry before putting it back on
the Receiver .
Travelling
Check with local authorities prior to departure as rules and regulations
may change without notice . Follow these guidelines when travelling:
• Notify security personnel of the presence of the device when going
through security systems .
• If you need to disable your Transmitter:
1. Select Menu
➞
Settings
➞
Airplane Mode
➞
Wireless = Off
and hold the Receiver directly on top of your Transmitter .
When your Transmitter is disabled, you will see the
icon and
“In Airplane Mode” on the Home screen .
• To re-enable your Transmitter:
1. Select Menu
➞
Settings
➞
Airplane Mode
➞
Wireless = On
and hold the Receiver directly on top of your Transmitter .
You will see the
icon when the wireless communication of
your Transmitter is re-enabled .
Note:
If you are changing time zones, you can manually change the
time and date settings on your Receiver by selecting
Menu
➞
Settings
➞
Time & Date
. Changing the time and date affects the Timeline
Graph and statistical results.
Disposal
This product should be disposed of in accordance with all applicable
local regulations related to the disposal of electronic equipment,
batteries, sharps and potentially biologically contaminated materials .
Contact Customer Care for further information on the appropriate
disposal of system components .
The Transmitter must not be disposed of via standard waste
collection . Separate collection for electrical and electronic
equipment waste per Directive 2002/96/EC in the European
Union is required .
ART22683-101_rev-B.indd 25-26
1/7/15 11:43 AM