![background image](http://html1.mh-extra.com/html/abbott/cell-dyn-3200/cell-dyn-3200_system-operators-manual_450985582.webp)
13-18
CELL-DYN
®
3200 System Operator’s Manual
9140181H—October 2001
Sample Loader
Sample Loader Description
Section 13
b. DO NOT move the remaining tubes in the rack, otherwise Work List
entries will also have to be changed to reflect the new rack and tube
positions of the remaining samples. Place the rack in the starting
position.
5. Replace the Tower Cover and press
[START LOADER]
followed by
[RESET
LOADER]
to resume operations.
Stopping the Sample Loader
The Sample Loader automatically halts when all loaded racks have been processed.
There are three ways to stop the Sample Loader during processing, as described
below:
1.
Power OFF
. Turn the Main Power Switch on the Analyzer to OFF. This
method is not recommended unless there is an emergency.
2.
Orderly Stop
. Press
[STOP LOADER]
for an orderly stop. Orderly stops allow
to complete aspiration of the sample that is currently or has been mixed in
Mixing Station 2 and finish the vent/aspiration/cleaning process. The
[START
LOADER]
soft key appears and you should press it to start the sample loading
process again.
3.
Emergency Stop
. Remove the Tower Cover to break the safety interlock
sensor connection. Emergency stops cause the Aspiration Needle to retract if
already in the tube and the Mixer to return the tube(s) to the rack before
bringing the Sample Loader to a halt. To completely remove the cover, lift it
vertically. An emergency stop results in a Fatal Fault condition. To resume
the sampling process:
a. Re-attach the Tower Cover.
b. Re-initialize and prime the instrument. The Sample Loader is
automatically initialized when the Analyzer is initialized.
NOTE:
To initialize the instrument, in the main
DIAGNOSTICS MENU
press
[MORE]
followed by
[INITIALIZATION]
. Refer to
Troubleshooting and Diagnostics
. To prime the instrument, press
[RUN]
in the
MAIN MENU
.
c. Move the rack that was under the Tower Cover to the starting position
and remove all processed samples.
d. When the system has been initialized and primed, press
[CHANGE
SAMPLER]
in the
RUN
menu to switch into the Closed Mode.
e. Press
[START LOADER]
to start processing samples.
Содержание CELL-DYN 3200
