Abbey Machinery Slurry Tanker Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 72

Abbey Machinery Slurry Tanker Скачать руководство пользователя страница 70

70

10.0 Warranty

The following warranty terms relate to parts only.
Abbey Machinery LTD will not accept claims for labour or mileage.

1.

This Vacuum Tanker is covered by the manufactures warranty for twelve months or one season.

2.

Vacuum Tankerused by agricultural contractors is covered by manufactures warranty for six months
from the date of purchase.

3.

Vacuum Tankerhired out to and operated by third parties is not covered by manufacturer’s warranty.

4.

Manufactures warranty does not cover wearing parts, e.g. Pump vanes, splash plate, wheels, etc.

5.

Under no circumstances will warranty claims be accepted for any damage caused by failing to adhere
to the operating instructions or maintenance requirements as outlined in this manual.

6.

Warranty claims will only be assessed when all alleged faulty parts have been returned to the
manufacturer. All parts dispatched to replace damaged parts under warranty consideration are
chargeable, pending decision on claim.

7.

For general warranty consideration please see terms and conditions of sale set out overleaf.

EC Declaration of Conformity

for machinery
according to Machinery Directive 2006/42/EC; Annex II A

Manufacturer:

Abbey Machinery

Well road
Nenagh
Tipperary
Ireland

We declare that this delivery of the following machine is complete and conforms to the essential safety
requirements of Machinery Directive 2006/42/EC.

Product Model No: ______________

of Vacuum liquid manure containers

Type of machine:

Vacuum Tanker

Serial number:

From 14000 onwards

All basic health and safety requirements according to Annex I of the above-mentioned directive are applied and
observed.

Signature:__

_______

Paul Callan
Operations Manager

«
...
68
69
70
71
72
»

Содержание Slurry Tanker









































































Отзывы:

Нет отзывов