ABB XT7, Руководство по эксплуатации и обслуживанию

Страница: 142 / 193

ABB | SACE Tmax XT
140 | © 2020 ABB | 1SDH001821A1002 - ECN000135670 External electronic accessories | 1 - Ekip Supply
1 - Ekip Supply
Ekip Supply is an accessory supply module. It is available in two models, depending on the incoming voltage
to be provided.
It performs three functions:
• supplies auxiliary power to Ekip Touch
• allows the terminal box modules to be supplied and connected to Ekip Touch
• acts as a bridge for the Local Bus between Ekip Touch and the external electronic accessories (e.g.
Ekip
Signalling 10K and Ekip Multimeter )
The module has a Power led to signal the presence of incoming power supply:
• off: no supply
• on (steady): supply present
Electrical characteristics
Model
Ekip Supply
24-48VDC Ekip Supply
110-240 VAC/DC
Power supply voltages 21,5 ÷ 53 VDC 105 ÷ 265 VAC/DC
Frequency -- 45 ÷ 66Hz
Maximum power consumption without modules
(1)
3 W 3 VA/W
Maximum power consumption with modules
(2)
10 W 10 VA/W
Maximum inrush current 2 A for 20 ms 2 A for 20 ms
(1)
Ekip Touch with just Ekip Supply
(2)
Ekip Touch with three modules connected with Ekip Cartridge
Connections
The module must be assembled in the first slot of the terminal box on the circuit-breaker (fixed version) or on
the fixed part (withdrawable version).
For references about the connection and terminals, please consult document
1SDM000002A1001 ; use AWG
22-16 cables with 1.4 mm maximum outer diameter for the external cabling.
To connect the module to Ekip Touch, please consult document
1SDH001000r0511
.