ABB XSeries G4 6200, Руководство пользователя, Страница: 82 / 168

Page 3
–20
2104349 rev. AD
Figure 3
–20 User Name and Password dialog box
A security key is generated and displayed after the configuration is saved to a
security file. The Security Key file is displayed with “n/a will be generated on
save”, before a configuration is saved or after any modifications are made to a
saved configuration. The security key is logged in the Security Log every time the
security file is sent to a device or the device warm boots. Additionally, it can be
used to verify the security file on the device is the one created by the security
administrator.
The PC file name of the security file is saved in the security file and displayed in
the Security Editor dialog title bar, when the file is read from a device. It will also
be used as a default file name, suggested for saving.
The Open button opens a security file from the PC for editing (see Figure 3
–18).
The New button clears all users and starts editing a new security configuration
with default roles and no users.
RBAC security files are saved with a unique extension (.rba), by default. There is
also a default directory that hosts these files. The directory is configurable by
selecting the menu item Operate > Setup > System Setup (Figure 3
–21).
Figure 3
–21 System Setup dialog box
When connected to a Totalflow G4 device, the Read button is enabled for all
users. Additionally, the Send button is enabled only for users with Administrator
rights. The Read button reads a security file from the device for editing. The Send
button is used to send and apply the security configuration to a device.
Another way to send a security file is to select the menu item (Operate > Security
> Role Based Access Control > Send Security File). This menu item is only