background image

Assembly Instructions / TPL65-A ... TPL77-A, TPL65VA

2  Safety / 2.3  Occupational safety

© Copyright 2020 ABB. All rights reserved.

HZTL455311P0017_EN

Rev.A

July 2020

u

Remove combustible objects and substances out of the range of flying sparks.

u

Cover all connections on the turbocharger so that no foreign objects can get into the tur-
bocharger.

u

Wear personal protective equipment (PPE) for welding operations.

Mechanical hazards when working on the turbocharger

 WARNING

Mechanical hazard

Severe injuries to personnel or fatal accidents can be caused by mechanical
influences as a consequence of hazardous and inadequate operational pro-
cedures.

u

Observe the general rules for occupational safety and prevention of acci-
dents.

u

Ensure workplace safety.

u

Only perform operations that are described in this chapter.

u

Only perform operations for which you have previously received instruc-
tion or training.

Hazards due to operating materials and supplies

Operating materials and supplies can include: Oils, greases, coolants, cleaning agents and
solvents, acids or similar substances.

 WARNING

Handling operating materials and supplies

Swallowing or inhaling vapours of operating materials and supplies or con-
tact with them may be harmful to health. Flammable and combustible oper-
ating materials and supplies can catch fire or resulting vapours can lead to
an explosion.

u

Do not breathe in these substances and avoid contact with the skin.

u

Ensure proper ventilation.

u

Observe the information in the material safety data sheet for the operat-
ing materials and supplies.

u

Comply with local legislation.

Wear safety goggles.

Wear safety gloves to protect against chemical hazards.

Wear a respiratory mask to protect against gases.

Page 

8

 / 

17

Содержание Turbocharger TPL-A Series





















Отзывы: