ABB TTH200, Инструкция по эксплуатации

Страница: 18 / 32

18 TTH200 HEAD-MOUNT TEMPERATURE TRANSMITTER | OI/TTH200-EN REV. B
… 8 Electrical connections
Electrical data for inputs and outputs
Input - resistance thermometer / resistances
Resistance thermometer
• Pt100 in accordance with IEC 60751, JIS C1604, MIL-T-24388
• Ni in accordance with DIN 43760
• Cu in accordance with recommendation OIML R 84
Resistance measurement
• 0 to 500 Ω
• 0 to 5000 Ω
Sensor connection type
Two-, three-, four-wire circuit
Connection lead
• Maximum sensor line resistance
per line 50 Ω in accordance with NE 89
• Three-wire circuit:
Symmetrical sensor line resistances
• Two-wire circuit:
Compensation up to 100 Ω total lead resistance
Measurement current
< 300 μ A
Sensor short circuit
< 5 Ω (for resistance thermometer)
Sensor wire break
• Measuring range: 0 to 500 Ω > 0.6 to 10 k Ω
• Measuring range: 0 to 5 Ω > 5.3 to 10 k Ω
Corrosion detection in accordance with NE 89
• Three-wire resistance measurement > 50 Ω
• Four-wire resistance measurement > 50 Ω
Sensor error signaling
• Resistance thermometer:
Sensor short circuit and sensor wire break
• Linear resistance measurement:
Sensor wire break
Input - thermocouples / voltages
Types
•
B, E, J, K, N, R, S, T in accordance with IEC 60584
• U, L in accordance with DIN 43710
• C, D in accordance with ASTM E-988
Voltages
• − 125 to 125 mV
• − 125 to 1100 mV
Connection lead
• Maximum sensor line resistance:
per line 1.5 k Ω , total 3 k Ω
Sensor wire break monitoring in accordance with NE 89
• Pulsed with 1 µA outside measurement interval
• Thermocouple measurement 5.3 to 10 k
Ω
• Voltage measurement 5.3 to 10 k Ω
Input resistance
> 10 M Ω
Internal reference junction Pt1000, IEC 60751 Cl. B
(no additional jumpers necessary)
Sensor error signaling
• Thermocouple:
Sensor wire break
• Linear voltage measurement:
Sensor wire break