Chapter 2
Tropos 1410 Installation Guide
24
3.
Attach the Tropos 1410 with mounting bracket to the pole bracket with two 5/16-inch
machine screws (refer to
for the correct orientation). Make sure the unit is level.
— Insert one screw through the hole at the top of the mounting bracket to the hole at the top
of the pole bracket.
— Insert the other screw through the curved slot track in the mounting bracket to the hole in
the middle of the pole bracket just above the clamp slot.
Figure 7
Wood Pole Mounting - Method 2
Mount the Tropos 1410 on a wood pole - Method 2
1.
Select a mounting location. You can attach the unit to any outdoor wood pole of diameter at
least 1 inch.
2.
Attach the Tropos 1410 directly to the pole by screwing 1/4-inch lag bolts through the holes
at the top and bottom of the unit’s attached mounting bracket (
). The bolts should be
at least 3 1/2 inches in length. Make sure that the unit is level.
To continue installing the Tropos 1410, see
