ABB TRIO-20.0-TL-OUTD Скачать руководство пользователя страница 7

Страница: 7 / 7

If the state remains

Not receiveing

for more than 10 minutes, click on your email ID at the top right of the

screen and click on ‘Event Ingestion Logs’ in the dropdown.

10.

Check if there is some log generated at the time of installation of the TrackSo IoT Gateway device.

NO,

please restart the device and try the same flow again.

YES,

email us at

to consult the same.

Содержание TRIO-20.0-TL-OUTD

Страница 3: ...OCOL Communication Card Settings Set the RS 485 termination resistance based on where the inverter is located in a daisy chain Single Inverters If a single inverter is connected to the monitoring system activate the termination resistance of the communication line by switching switch a12 or a13 to ON position Set the Correct Date Time Select Modbus RTU Communication Protocol ...

Страница 4: ...respondence between signals and activate the termination resistance of the communication line in the last element of the chain by switching switch a12 or a13 to ON position being careful to switch the switch of the serial line used PC or PMU The above details are also mentioned in the Installation Operation Manual for ABB Inverters ...

Страница 7: ...op right of the screen and click on Event Ingestion Logs in the dropdown 10 Check if there is some log generated at the time of installation of the TrackSo IoT Gateway device a If NO please restart the device and try the same flow again b If YES email us at we freespirits in to consult the same ...