7 TRIO 20.0/27.6-TL-OUTD-US-480 | Programming for HECO compliance
Appendix B: How to launch Aurora Manager LITE
Aurora Manager LITE software is available at no cost from ABB and allows the installer or customer to monitor the plant, as well
as change inverter settings.
To launch this software, once the inverter is connected to a laptop PC as described in Appendix A, access the COM settings as
shown in Figure 8 below:
To determine which COM port to use, once the inverter is connected to the laptop PC through the adapter, this can be determined
by opening the computer’s Control Panel and clicking on the
Device Manager
tab and then on the
Ports (COM & LPT)
tab, as
shown in Figure 9 below.
Figure 8 - Launch Aurora Manager LITE software
Figure 9 - Access the laptop PC Control Panel (Device Manager) to determine which COM port to use
