ABB TPX Series, Руководство по сборке

Страница: 12 / 20

Assembly Instructions / TPX44-H
4 Installing the turbocharger / 4.1 Inserting gaskets
© Copyright 2019 ABB. All rights reserved. HZTL455311P0037_EN Rev.A November 2019
4 Installing the turbocharger
4.1 Inserting gaskets
The oil is drained (03) through the bracket (01). The oil is supplied (02) separately via the
connection at the top side of the bearing casing (see Outline Drawings for dimensions).
The necessary gaskets (05) must be integrated in the support plate. A suggestion for the
slot shape (04) is shown below. The gaskets are not included in the ABB Turbo Systems
scope of delivery and must be provided by the enginebuilder.
u
Use O-ring gaskets with a cord diameter of at least 3.5 mm.
u Integrate the slots in the contact surface of the bracket (01).
CAUTION
Oil leak
Damaged or improperly inserted gaskets lead to oil leaks.
u
Always use new gaskets and insert them carefully into the slot.
Fig. 5: Oil supply connection
Fig. 6: Inserting gaskets
Page
10
/
17