ABB TPR56FV Series Скачать руководство пользователя страница 9

Assembly Instructions / TPR56FV.. - TPR61FV..

2  Safety / 2.3  Occupational safety

© Copyright 2018 ABB. All rights reserved.

HZTL455311P0033_EN

Revision B

May 2018

2.3

Occupational safety

General

 WARNING

Injuries to persons

Severe injuries to personnel or fatal accidents can be caused by mechanical
influences as a consequence of hazardous and inadequate operational pro-
cedures or non-compliance with safety and health standards.

u

When working on the turbocharger always wear safety footwear and pro-
tective clothing to protect against mechanical hazards.

u

Keep personal protective equipment in perfect condition.

u

Obey mandatory signs.

u

Observe the general rules for occupational safety and prevention of accidents.

u

Only perform operations that are described in this chapter.

u

Only perform operations for which you have received instruction or training.

Wear safety footwear to protect against mechanical hazard and risk of falling.

Wear protective clothing.

 WARNING

Risk of falling

When working on the turbocharger, there is a risk of falling.

u

Do not climb onto the turbocharger or onto attached parts and do not
use them as climbing aids.

u

Use suitable climbing aids and working platforms for work above body
height.

u

Only perform work on the turbocharger when you are in a physically and psychologically
stable condition.

u

Only work with suitable tools, equipment and appliances that function properly.

u

Keep the workplace clean; clear away any loose objects and obstacles on the floor.

u

Keep the floor, equipment, and turbocharger clean.

u

Have oil binding agents ready and provide or keep oil pans at hand.

Welding work close to the turbocharger

u

If welding work is being carried out in the vicinity of the turbocharger, cover the filter si-
lencer so that the filter mat is not damaged.

u

Remove combustible objects and substances out of the range of flying sparks.

u

Cover all connections on the turbocharger so that no foreign objects can get into the tur-
bocharger.

Page 

7

 / 

17

Содержание TPR56FV Series





















Отзывы: