Assembly Instructions / TPL76-C
3 Weight and transportation of the turbocharger /
© Copyright 2020 ABB. All rights reserved.
HZTL455311P0015_EN
Rev.A
July 2020
3
Weight and transportation of the
turbocharger
A suspension unit must be prepared for installing the turbocharger. The weight specified be-
low applies to the heaviest variant possible. Depending on the specification, the weight spe-
cified on the rating plate may be lower than the standard value specified here.
u
Prepare the suspension unit in accordance with the values specified below.
TPL76-C dimension for suspending
Distance [mm]
A
860
B
1210
C
800
Table 4
u
Remove insulation jackets and the insulation from the foot on the gas inlet side before
suspending.
At least two of the three suspension eyes on the bearing casing (L1, L2) have to be used (ob-
serve the marking on the insulation). The two suspension eyes on the turbine-end foot (T1,
T2) are used for horizontal alignment of the turbocharger.
Weight [kg]
TPL76-C
4070
Table 5
Page
9
/
21
Содержание TPL-C Series
Страница 2: ......