ABB TMAX XT XT2 THERMOMAGNETIC, Инструкция по разборке

Страница: 22 / 28

22 INSTRUCTION HANDBOOK
6.13 PHASE 13 – TRIP UNIT
Actions to be performed
Tools
Flat screwdriver
Pliers
Torx key
No. 8
53
Manually lift the thermal shaft.
55
By means of the flat screwdriver remove the 2
trimmers located on the trip unit front.
57
By means of the flat screwdriver lift the
moving armatures located in each pole and
after manually complete the removal of the
moving armatures.
54
By gravity let the rod present in the thermal
shaft come out.
56
By means of the pliers unhook the 3 springs
located in the poles.
58
By means of the flat screw driver push the pin
mounted in the side between the central and
the right pole as indicated by the arrow.