1YSA160003-EN - Rev. 5
16 / 19
D.4.3.8.
Mounting the AutoLinks in the three phase body
For each AutoLink place the hookstick in the tube’s lower contact eyelet and mount in the isolating support body.
Figure 17.
Withdraw the pole and place it in the tube’s superior eyelet (See Figure 10). Push it until it remains in closing position.
Figure 18.
REMEMBER! It is not recommended to close the AutoLink under load.
The line must be measured before to avoid closing under fault for safety reasons.
Содержание Three Phase Mechanical AutoLink
Страница 15: ...1YSA160003 EN Rev 5 15 19 Figure 16 ...