background image

Table of Contents:

1. General Information .................................................................. 2-3

 

– DANGER: Safety rules .....................................................................2

 

– CAUTION: Personal Safety ............................................................2

 

– WARNING: Tool Use and Care .......................................................2

 

– CAUTION: Battery and Charger Use and Care .........................2

 

– Features .............................................................................................2

 

– Specifications ...................................................................................2

2. Part & Accessories .........................................................................3

 

– Hydraulic Compression Tool.........................................................3

 

– Battery (BAT-MK) .............................................................................3

 

– Charger ..............................................................................................3

 

– Tool Hand Bag ..................................................................................3

3. Operating instructions .............................................................3-4

 

– Charging the battery ......................................................................3

 

– Attaching & Detaching the battery pack ...................................3

 

– Compression cycles ........................................................................4

 

– Switch operations ...........................................................................4

 

– Compression operation .................................................................4

4. Auto retract ................................................................................... 4
5. Troubleshooting guide ................................................................ 5

Read and understand all instructions and 
safety information in this manual
before operating or servicing this tool.    
Be aware of proper usage and potential 
hazards.

Important

CAUTION:

• 

Installations should be performed by a qualified 

electrician in accordance with national and local 
electrical codes.

WARNING:

• 

Risk of shock, disconnect power before 

installation.

• 

Never attempt to make a compression on a  “HOT” 

Line.

• 

Never assume the power is OFF! Determine 

beforehand if any electrical hazards could exist 
when making a connection to line or wire.

• 

Tools are NOT insulated for use on or near 

conductors. Use of these tools near energized 
conductors may lead to electrical shock, causing 
severe injury or death. 

DO NOT

 use these tools 

near energized conductors.

CAUTION:

• 

Wear safety glasses and any other required PPE.

WARNING:

• 

Pinch points, keep hands and other body parts 

away from the crimping head when crimping. 
Compression dies at high force can cause severe 
personal injury. Failure to observe this warning 
could result in severe injury or death.

1 of 5

OPERATING INSTRUCTIONS

Hydraulic compression tool

TBM6PCR-LI

Содержание T&B TBM6PCR-LI






Отзывы: