45/78 SUREWAVE SFC USER MANUAL
Terminal no.
Name
Description
Notes
P288-V1
V
set
(default)
Can be configured to control the
External output voltage setpoint
+/-10V
P288-V2
F
set
(default)
Can be configured to control the
External output frequency setpoint
+/-10V
P288-I1
V
set
(default)
Can be configured to control the
External output voltage setpoint
0-20mA or 4-20mA
P288-I2
F
set
(default)
Can be configured to control the
External output frequency setpoint
0-20mA or 4-20mA
Table 9-3: Summary of analogue inputs
9.2.4 Analogue outputs
Two analogue outputs are provided, to enable customer monitoring of various running parame-
ters in the SFC. Table 9-4 summarizes these analogue outputs. Each analogue output may be
configured as 0-20mA or 4-20mA or 0-10Vdc
Figure 9-7: User analogue outputs
Terminal no.
Name
Description
P289-1
% of rated power
Output indicates output power delivered as % of its
rating
P289-2
% of rated current
Output indicates output current delivered as % of its
rating
Table 9-4: Summary of analogue outputs
9.2.5 External voltage sync
A DB9 male connector is provided to enable the SFC output voltage synchronization with an ex-
ternal AC bus. Measurements are taken through a external voltage sense board.
