ABB STT04, Инструкция по эксплуатации

Страница: 157 / 285

INTRODUCTION
J - 1
APPENDIX J - TBN480 CONDUCTIVITY TRANSMITTER
INTRODUCTION
This appendix covers the configuration and calibration functions of
the TBN480 Conductivity Transmitter.
Refer to OPERATING PROCEDURES in Section 4 for information on
the following functions:
NOTE: To change calibration or configuration parameters of a smart
field device that is connected to an IMFBS01 module, the device
must be taken off-line. This is done at the INFI 90 OPEN console.
CREATE/MODIFY CONFIGURATION
A configuration can be created off-line, without a connected field
device. Refer to Figure
J-1 for an overview of the configuration
function. The following table details the configuration process.
•
Send configurations.
•
Select configurations.
•
Get configurations.
•
Erase configurations.
•
View configurations.
•
Operational functions.
Figure J-1. Configuration Flowchart (TBN480)
T 01 3 39 A
C H O O SE A
R A N G E JU M P E R
S E LE C T
S E N S O R
G R O U P
ID TAG S E LE C T M O D E
D IG ITA L
A N A LO G
E N T E R
C H A N N E L
N U M B E R
S E LE C T
T R A N S M IT TE R
T Y P E
S E LE C T
T E M P E R AT U R E
C O M P EN S AT IO N
E F FE C T
S E LE C T D IAG
S P IKE N O /Y E S
E N T E R
D A M P IN G
C O N S TA N T
S AV E
C O N F IG U R ATIO N
S E LE C T
A N A LYZ E R
T Y P E
E N T E R L O W E R
R A N G E VA L U E
E N T E R U P P E R
R A N G E VA L U E
S E LE C T
IN ITIA L IZ E
M O D E
S E LE C T FA IL
M O D E
S E LE C T
T E M P E R AT U R E
C O M P EN S AT IO N
IN P U T
C
O
N
F
I
G
U
R
E