ABB SREA-01, Руководство пользователя

Страница: 41 / 106

Setting up SREA-01 for typical applications
41
Data logger application
In addition to the most important common settings described above, you should
check these settings if you are using SREA-01 for data logging:
1. Regional settings (Setup – Regional)
The regional settings are used for setting the time of the internal real-time clock of
the SREA-01 unit. In logging applications this is important because the data is time-
stamped by the internal real-time clock. The regional settings can be accessed by
selecting Setup – Regional.
Date, time and the time zone are the most important regional settings. For more
information, refer to section
Regional on page 69 .
2. FTP settings for sending log files (Setup – FTP)
If needed, the FTP settings are used to define where SREA-01 should upload logs
by FTP. The FTP settings can be changed by selecting the page Setup – FTP. For
more information on the FTP settings, refer to section
FTP on page 73 .
3. E-mail settings for sending log files (Setup – Email)
If needed, the E-mail settings are used to define which SMTP server SREA-01
should use when sending logs by E-mail. The E-mail settings can be changed by
selecting the page Setup – E-mail. For more information on the E-mail settings, refer
to section
E-Mail on page 70 .
4. Modem settings for GPRS connectivity (Setup – Modem)
If the logs are to be sent by E-mail or FTP over GPRS, the modem has to be
configured on the Setup – Modem page. The most important settings are:
• Modem type: GPRS
• Pin code
• Dial-up: select ‘enable’ to enable connecting to the Internet
• Connection trigger: select ‘connect on alarm or event’ if you want the SREA-01
unit to connect to Internet only when it is sending logs or ‘always connected’ if you
want to be able to access the web pages remotely over GPRS as well.
• Access point name, user name, and password: Enter the information your
Internet Service Provider has given to you.
For more information, refer to section Modem on page 66 .
5. Log file recipients (Setup – Users)
If the logs are sent by E-mail, you have to configure the recipients of the logs on the
page Setup – Users. Create a user account for each recipient, enter an E-mail
address and enable ‘Receive log files via E-mail’. For more information, refer to
section
Users on page 61 .
6. Log configuration (Configuration – Log)
Finally, you have to configure the parameters that you want to log on the page
Configuration – Log. For more information on the logging options, refer to section
Log on page 87 .