ABB SPA-ZC 402, Руководство по эксплуатации продукта

Страница: 3 / 8

3
Ethernet Adapter SPA-ZC 402
Features
• Enables IEC 61850 connectivity for IEDs
with a fibre optic SPA bus.
• Auxiliary power supply
• Disturbance recorder file upload via
IEC 61850
• Easy-to-use configuration tool for the
IEC 61850 data mapping
• Communication over SPA/TCP
• Communication over Modbus/TCP
Application
a060239
Fig. 1 Conceptual picture of a typical system setup
Introduction
Using the SPA-ZC 402, an Intelligent Elec-
tronic Device (IED) with a fibre optic SPA
bus can be connected to the Ethernet based
IEC 61850-8-1 station bus.
IEC 61850 is the new standard for substation
communication. Additionally to being a com-
munication standard, it also supports general
substation automation functions as well as the
engineering process.
SPA-ZC 402 also enables ethernet access to
an IED using the SPA over TCP/IP and Mod-
bus over TCP/IP.
The SPA-ZC 402 acts as a communication
adapter between the SPA bus and the IEC
61850-8-1 station bus. The SPA-ZC 402
maps the SPA protocol interface to the IEC
61850-8-1 standard. This enables connecting
products with optical SPA interface to IEC
61850 based networks in both new and retro-
fit installations.
More information on how to physically con-
nect the device can be found in the chapter 5
of the Installation and Commissioning man-
ual. SPA-ZC 402 programming is described
in the Installation and commissioning man-
ual, chapter 6, Engineering.
As a prerequisite, you should understand the
communication properties of the IED that is
to be connected to Ethernet adapter. This
information is available in the manual for the
protection IED in question.
REF 542plus
COM600
1MRS755479
Issued: 08.12.2004
Status: Updated
Version: E/20.05.2009
Data subject to change without notice