ABB Slimline XRG00, Инструкция по установке

Страница: 15 / 32

280-880V
40-140
Application
±
5%
—
EFM
13 SWITC H D ISCO NNEC TO R FUSE, XRG 00
The EFM unit will survive an insulation test voltage of 1.6kV. However, by insulation test, we recommend
that the EFM module can be completely removed by also disconnecting the internal plug to the rear side
of the Multiplug. This will also avoid leakage current between the main phases.
EFM is powered by the XR busbar contacts, and it starts to operate once the XR switch is in close position.