Packaging for transport
22
Thermal Mass Flowmeter FMT200-D (Sensyflow D)
42/14-37 EN
11 Packaging for transport
If the original packaging material is no longer available, wrap the device in a padded plastic film or corrugated
paper board and place it in a box of sufficient size lined with a shock-absorbing material (e. g. foam rubber). The
thickness of the shock-absorber should be in accordance with the device weight and the type of shipment.
The box must be handled with care and has to be labeled accordingly.
For overseas shipment always add a desiccant (e.g. silica gel) and wrap the device and the desiccant bag in
apolyethylene foil of 0.2 mm. Adapt the amount of desiccant to the packing volume and the expected transport
time (at least sufficient for 3 months). Additionally line the box with a layer of union paper.
Without exception, all returned ABB devices must be supplied with a decontamination confirmation (return-re-
port) that has been completely filled out and signed by authorized specialist personnel (see chapter 2.2.2). Pro-
cessing of the return is not possible without this confirmation.
