ABB Sense7 Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 15

ABB Sense7 Series Скачать руководство пользователя страница 2

2TLC172249M0201, REV. C 2021-10-12

2

Read and understand this document

Please read and understand this document before using the products. Please consult your ABB Motor Start-
ing & Safety representative if you have any questions or comments.

Suitability for use

ABB Electrification Sweden AB shall not be responsible for conformity with any standards, codes, or regula-
tions that apply to the combination of products in the customer’s application or use of the product. Third
party certificates for the products are available at
https://new.abb.com/low-voltage/products/safety-products. This information by itself is not sufficient for
a complete determination of the suitability of the products in combination with the end product, machine,
system, or other application or use.

The following are some examples of applications for which particular attention must be given. This is not
intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses
listed may be suitable for the products:

•

Outdoor use uses involving potential chemical contamination or electrical interference, or conditions
or uses not described in this document.

•

Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical
equipment, amusement machines, vehicles, and installations subject to separate industry or govern-
ment regulations.

•

Systems, machines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY
WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND
THAT THE ABB PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.

Descriptions and examples show how the product works and can be used. It does not mean that it fulfills
the requirements for all types of machines and processes. The buyer/user is responsible for installing and
using the product according to applicable standards and regulations. We reserve the right to make changes
to the product and the documentation without prior notice.

«
1
2
3
4
...
»

Содержание Sense7 Series
















Отзывы:

Нет отзывов