ScreenMaster RVG200
Paperless recorder
7 Configuration
94
OI/RVG200-EN
7.9.3 Digital input configuration
Note.
The
Digital I/P
tab is displayed only if
Source ID
for the Recording Channel is set to a digital
signal source – see Section 7.9.1, page 86.
Digital I/P A1
Input type
*
Note.
This parameter is displayed only if
Input type
on the
Analog I/P
tab (see page 90) is set to
Volt-free Digital Input
or
24V Digital Input
. If this
parameter is changed to anything other than
Volt-free Digital Input
or
24V
Digital Input
, the input channel reverts to an analog input channel – see
Digital on tag
Enter the tag to be displayed on channel indicators when the digital signal
is active (6 characters maximum).
Refer to Appendix F, page 180 for further information regarding character
use in tags.
Digital off tag
Enter the tag to be displayed on channel indicators when the digital signal
is inactive (6 characters maximum).
Refer to Appendix F, page 180 for further information regarding character
use in tags.
Tag
Enter the tag name to be displayed in the Chart-, Bargraph- and
Indicator-views and used to identify the channel in archive files
(16 characters maximum).
Refer to Appendix F, page 180 for further information regarding character
use in tags.
*
If this parameter is changed to or from
Volt-free Digital Input
or
24V Digital Input
, internally-recorded data
files are recreated and unarchived data is lost.
