ABB SAM600 Series, Инструкция по эксплуатации

Страница: 20 / 68

The organization structure for a SAM600 systems may differ from the structure of the primary
equipment in the substation. In PCM600 it is possible to set up five levels of hierarchical
structure for a SAM600 system identification, see Figure 3 .
IEC18000106 V1 EN-US
Figure 3: PCM600: Plant Structure
The different plant structure levels are available for the selected project. Several SAM600
systems are possible within a bay, for example one control SAM600 system and two
protection SAM600 systems.
Table 1: Plant Structure levels
Level Description
Project Project name
Substation Name of the substation
Voltage Level Grid type or part in the substation to which a SAM600
system belongs to
Bay Bay within the voltage level
SAM600 MU Selection of a SAM600 system used in the bay
Once a plant structure is built, the name of each level in the structure should be renamed by
the names or identifications used in the grid. Use the right mouse button to build the plant
structure by selecting the elements from the context menu. Rename the level after insertion
using the
Rename possibility or the Object Properties.
Figure 3 shows the start of a project
with single SAM600 system placed, before renaming the level.
The plant structure corresponding to the complete grid includes the required
SAM600 systems.
The following procedure can be followed for building a plant structure.
1. Right-click on the Plant Structure, select New and Create from Template ..., or
2. Right-click on the Plant Structure select New, General and select either SAM600 MU Group
or Substation
3. Click View in the menu bar and select Object Types. Select the required elements and drag
and drop them into the Plant Structure.
Section 4 1MRK 511 433-UEN B
Setting up a project
12 SAM600 Process Bus I/O System
Engineering manual
© Copyright 2017 ABB. All rights reserved