ABB SafeLink Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 20

ABB SafeLink Скачать руководство пользователя страница 2

abb

SafeLink

SF

6

Insulated Ring Main Unit

Installation and Operating Instructions

SLMIO ver 2.12

ABB Ltd, Switchgear Division, Auckland, New Zealand

Product Overview

ABB's type-tested SafeLink ring main unit (RMU) is an SF

6

insulated RMU utilising

the latest developments in switchgear technology to provide a very compact switchgear
solution. SafeLink is a completely sealed system with a stainless steel tank containing
all live parts and switching functions. A hermetically sealed tank separated from the
outside environment ensures a high level of reliability as well as personal safety and a
virtually maintenance free system.

SafeLink is manufactured according to the latest environmental and quality standards.
The ABB assembly plant is certified according to ISO9001 (Quality) and ISO14001
(Environmental). SafeLink equipment conforms to all applicable IEC standards.

This manual provides detailed information on the handling, installation, commissioning
and operation of SafeLink.

The range of SafeLink products and the specifications of the equipment are subject to
change without notice as product features and benefits are added.

For more information, or to discuss SafeLink operation, please contact your local ABB
office or ABB Ltd, Switchgear Division in Auckland, New Zealand:

ABB Ltd
Switchgear Division
133 Central Park Drive
PO Box 83-203
Auckland 8
New Zealand

Ph: +64 9 837 1234
Fax: +64 9 837 2950

This manual provides detailed information on the handling,

installation, commissioning and operation of SafeLink. It is

not a repair manual nor should it be used for that purpose.

If equipment is not functioning in accordance with these

instructions, suffering faults or damage, specific advice

should be sought from your supplier.

«
1
2
3
4
...
»

Содержание SafeLink





















Отзывы:

Нет отзывов