![background image](http://html.mh-extra.com/html/abb/sace-tmax-xt5/sace-tmax-xt5_operation-and-maintenance-manual_2240033.webp)
ABB | SACE Tmax XT
Interface and menus | 4 - Menu
31 | © 2019 ABB | 1SDH002039A1002 - ECN000093027 - Rev. A
Advanced menus
The
Advanced
menu can be used to configure the following protections
(1)
:
Name
Parameters
SW package
Page
MCR
List in dedicated chapter
Standard Protections
2I
List in dedicated chapter
IU
List in dedicated chapter
UV
(2)
List in dedicated chapter
Voltage protections
OV
(2)
List in dedicated chapter
UV2
(2)
List in dedicated chapter
OV2
(2)
List in dedicated chapter
VU
(2)
List in dedicated chapter
S(V)
(2)
List in dedicated chapter
Voltage Advanced protections
S2(V)
(2)
List in dedicated chapter
RV
(2)
List in dedicated chapter
UF
(2)
List in dedicated chapter
Frequency protections
OF
(2)
List in dedicated chapter
UF2
(2)
List in dedicated chapter
OF2
(2)
List in dedicated chapter
RP
(2)
List in dedicated chapter
Power protections
D
(2)
List in dedicated chapter
RQ
(2)
List in dedicated chapter
OQ
(2)
List in dedicated chapter
UP
(2)
List in dedicated chapter
OP
(2)
List in dedicated chapter
ROCOF
(2)
List in dedicated chapter
ROCOF protections
R STALL
(2)
List in dedicated chapter
Motor protections
R JAM
(2)
List in dedicated chapter
UC
(2)
List in dedicated chapter
U
(2)
List in dedicated chapter
PTC
(2)
List in dedicated chapter
V DIR, VINV
(2)
List in dedicated chapter
Interface protections (IPS)
59 S1
(2)
List in dedicated chapter
Warnings
VS Warning, FS Warning, FW1
Warning
Signallings
Threshold 1 I1, Threshold 2 I1,
Threshold Iw1, Threshold Iw2,
Phase Sequence
(2)
, CosØ
(3)
Standard Protections
Functions
External Trip, Trip Reset, Switch
On SET B
(4)
Synchrocheck
List in dedicated chapter
(5)
(1)
if the
Adaptive Protections
package is available and
Dual set
has been activated, an intermediate menu
where the set can be selected (Set A / Set B) will be available before the list of protections (page 67); The only
menu always present via
Advanced
is
Functions
(2)
available if provided for by Trip unit model or if the relative SW package has been activated, where possible
(page 6)
(3)
CosØ available if provided for by Trip unit model or if the
Power Protections
package has been activated
(4)
SET B
available when
Adaptive Protections
package is present
(5)
available when
Ekip Synchrocheck
is present
Содержание SACE Tmax XT5
Страница 2: ...ABB SACE Tmax XT 2 2019 ABB 1SDH002039A1002 ECN000093027 Rev A ...
Страница 4: ...II 2019 ABB SACE Tmax XT 1SDH002039A1002 ECN000093027 Rev A ...
Страница 204: ...ABB SACE Tmax XT 202 2019 ABB 1SDH002039A1002 ECN000093027 Rev A Other accessories 5 Testing and Programming ...
Страница 205: ...1SDH002039A1002 ECN000093027 Rev A ...