ABB RTB615, Техническое руководство, Страница: 24 / 28

RTB615 enables IED plug-in unit testing in parallel to the panel wiring and IED case
installation work. This allows two persons to work simultaneously without disturbing
each other in the process.
Retrofit program provides testing templates for specific IED models replacing old
relays. These templates are verified by ABB together with migrated configuration
from old relay.
3.1.1 Testing templates
The parameter settings of the existing relay have been migrated into the new
replacement IED parameters and configuration during the migration phase. The
testing phase target is to verify two issues; the new replacement IED is in full
operation condition and the behaviour corresponds to behaviour of the old relay.
Specific test templates have been created to support this phase.
Each test template covers a specific existing relay and new IED set-up. The templates
are designed to be used by the Omicron Test Universe. The templates support testing
of protection features as per the existing relay functionalities. An editable report of the
carried out tests is issued at the end of the test sequence.
When the test templates are applied, the Omicron Test Universe guides the user
through a semi-automated test sequence. The templates receive the IED settings from
the Parameter Setting Tool of PCM600 in XRIO-based format.
IECA070901 V3 EN
S1
S2
X1
X2
X3
F1,F2
X100
X110
X120
X130
PE
+48 VDC OUT
+48 VDC IN
0 1
PCM600 &
Omicron Test Universe
Omicron test device
Relion® test box
Voltage
Current
GUID-9D8D7515-95A9-457E-8072-2C47EB180D65 V1 EN
Figure 6: Test system based on RTB615 and Omicron toolset
Section 3
1MRS758004 B
Application examples
16 RTB615
Technical Manual