manualshive.com logo in svg

ABB RHDE8000, Руководство по эксплуатации

Поделиться
Скачать
ABB RHDE8000 Скачать руководство пользователя страница 15

 

Installation

 

42/68-168-EN RHDE8000 

... 16000 (Contrac) 

15 

4.4.2  Adjusting the stops in dependence of the travel 

 

Pos: 11.13 /Montage/Aktorik/Elektr. Schwenkantriebe/Allgemein/Wegabhängige Anschlageinstellung @ 10\mod_1181570388312_3101.doc @ 103106 

 

1.

 

Move the output lever / valve to the position requiring fine adjustment. 

2.

 

Put the stop onto the toothing as close to the output lever as possible and fasten it with 
screws. 

3.

 

The mechanical limit stops may not be fixed within the adjusted operating range. 

4.

 

Move the output lever towards the stop using the handwheel; turn the coupling rod for fine 
adjustment. 

5.

 

Fasten the counter nuts. 

6.

 

Fasten the stop in the other mounting position close to the end position, depending on the 
toothing. 

 

Pos: 11.14 /Überschriften/1.1.1/1-spaltig/Kraftabhängige Anschlageinstellung @ 10\mod_1181635174750_3101.doc @ 103626 

 

4.4.3  Adjusting the stops in dependence of the torque 

 

Pos: 11.15 /Montage/Aktorik/Elektr. Schwenkantriebe/Allgemein/Kraftabhängige Anschlageinstellung @ 10\mod_1181570779703_3101.doc @ 103152 

 

1.

 

First proceed as described above for travel-dependent adjustment. 

2.

 

Prior to re-fastening the counter-nut provide pretension in the valve’s "CLOSED" position. 

3.

 

Lock the hand wheel. 

4.

 

Turn the coupling tube or slightly shift the limit stops to get a small gap between lever and 
limit stop. 

5.

 

The procedure and gap size depend on the stiffness of the linkage arrangement. 

6.

 

Tighten the counter-nuts and limit stop screws. 

Pos: 11.16 /Überschriften/1.1/1-spaltig/M - O/Montagebeispiel @ 10\mod_1181637256390_3101.doc @ 103672 

 

Содержание RHDE8000



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды