manualshive.com logo in svg

ABB RET630, Руководство по эксплуатации продукта

Поделиться
Скачать
ABB RET630 Скачать руководство пользователя страница 2

Contents

1. Description...........................................................3

2. Application...........................................................3

3. Preconfigurations.................................................5

4. Protection functions.............................................8

5. Control................................................................10

6. Measurement.....................................................10

7. Disturbance recorder..........................................11

8. Event log.............................................................11

9. Disturbance report.............................................12

10. Circuit-breaker monitoring................................12

11. Trip-circuit supervision......................................12

12. Self-supervision.................................................12

13. Fuse failure supervision.....................................12

14. Current circuit supervision................................12

15. Access control...................................................13

16. Inputs and outputs............................................13

17. Communication.................................................14

18. Technical data...................................................14

19. Front panel user interface.................................51

20. Mounting methods............................................51

21. Selection and ordering data..............................53

22. Accessories.......................................................55

23. Tools..................................................................56

24. Supported ABB solutions..................................58

25. Terminal diagram...............................................59

26. References........................................................61

27. Functions, codes and symbols.........................61

28. Document revision history.................................64

Disclaimer

The information in this document is subject to change without notice and should not be construed as a commitment by ABB Oy. ABB Oy assumes
no responsibility for any errors that may appear in this document.

© Copyright 2009 ABB Oy.

All rights reserved.

Trademarks

ABB and Relion are registered trademarks of ABB Group. All other brand or product names mentioned in this document may be trademarks or
registered trademarks of their respective holders.

Transformer Protection and Control

1MRS756788 A

RET630
Product version: 1.0

Issued: 15.09.2009

2

ABB

Содержание RET630





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды