4.4.
Semi-flush mounting
The semi-flush mounting kit contains (for order number, refer to
Chapter 6. Accessories):
*
Raising frame
*
Gasket
*
Screws
The gasket is used when an IP 54 degree of protection (according to IEC
60529) is required for the front side. If the gasket is not used, an IP 50 degree
of protection is obtained.
Mount the raising frame to the cut-out in the panel with four screws according
to the Fig. 4.4.-1.
A device equipped with optic connections requires a minimum
depth of 130 mm
Ø 5.5
165.5
+1
-1
173.5
+0.3
-0.3
161.5
+1 -1
133
+0.3 -0.3
Panel
Raising frame
M4 screws
Dimensions of panel cut out
A040174
Fig. 4.4.-1
Mounting raising frame
20
RE_ 610
Protection Relay
Installation Manual
1MRS752265-MUM
