ABB RELION REX640, Техническое руководство, Страница: 1760 / 1960

losses or even dangerous operation conditions for the process itself. Solution is to
connect a standby power supply for the installation.
The HSABTC function monitors the voltage and frequency of the available supply
feeders and the busbar. Function continuously keeps track on the allowed transfer
direction and the standby incomer(s) readiness for transfer. Bus transfer can
be initiated internally by the function, based on drop on voltage or frequency.
Alternatively external initiation can be used. Once transfer is initiated, sequence for
busbar transfer is executed according to the allowed and enabled transfer modes.
HSABTC also provides support for load shedding as a part of the transfer sequence.
9.12.4 Analog channel configuration
HSABTC has five analog group inputs which must be properly configured.
Table 1600: Analog inputs
Input Description
U3P1 Voltage from feeder 1
U3P2 Voltage from feeder 2
U3P_BB Voltage from busbar
I3P1 Current from feeder 1
I3P2 Current from feeder 2
Recommended number of measured voltages is following:
• U3P1: all three phases, can be phase-to-phase or phase-to-ground voltages
• U3P2: all three phases, can be phase-to-phase or phase-to-ground voltages
• U3P_BB: one phase-to-phase voltage
Minimum requirement is to have one voltage connected to each voltage group.
In this case all measurements must be made with the same connection type,
meaning all measurements must be either phase-to-ground or phase-to-phase
voltages. Mixing between different connections types in this case is not allowed.
Measurements must also be made from same phase (phase A or phase AB), mixing
between phases is not allowed.
Table 1601
shows supported voltage connections.
Table 1601: Supported voltage connections
U3P1 U3P2 U3P_BB Note
3 phase-to-phase 3 phase-to-phase 1 phase-to-phase Recommended
3 phase-to-ground 3 phase-to-ground 1 phase-to-phase Recommended
3 phase-to-phase 3 phase-to-phase 1 phase-to-ground Not recommended
Table continues on the next page
Control functions 1MRS759142 F
1760 REX640
Technical Manual