ABB Relion REB500, Руководство по применению

Страница: 28 / 60

Section 3
1MRK 505 353-UEN
Configuring bay protection using HMI500
20 Application Manual
Bay protection functions REB500
Figure 4 Select Protection Functions
Table 37 Select Protection Function – used BP Functions
Menu item Description
No. Unique instance number of the BP function
Func. Symbol representing the BP function of the instance
Description User specific description of the BP function of the instance
P1..P4 Parameter set in which the protection function occurs. Switching between
parameter sets is accomplished using the binary input signals 19600_x,
19605_x, 19610_x and 19615_x
x = “Activation BP ParSet 1..4”
Copy of Instance No. of the original function, where the instance is a copy of a func-
tion that already exists.
If the number of function instances exceeds the size of the display area, a scroll bar
automatically appears on the right. The maximum number of instances per bay unit
is limited to 128.
There are a number of tabs, which can be selected in this part of the dialog. The
first tab (ParSet 1..4) lists all the functions. It has to be selected to change functions
and determine the instances where they occur. The tabs
ParSet 1 to ParSet 4 list
the functions configured for a particular parameter set and are merely for infor-
mation.
Creating instances of protection functions
An instance of a protection function is created by selecting it in the list on the left
of the dialog using the left mouse button and while keeping the button depressed
dragging it onto the area of the first tab (ParSet 1..4) (drag and drop). It is not pos-
sible to ‘drop’ the function while the symbol
is being shown. The instance of