ABB Relion 670 series, Руководство по установке и пусконаладке

Страница: 182 / 260

-3U
0
=U
ref
Operate area
Instrument
transformer
angle error
3I
0
(prim)
3I
0
(to prot)
a
Characteristic after
angle compensation
RCAcomp
en06000651.vsd
RCADir = 0º
IEC06000651 V2 EN
Figure 95: Explanation of RCAcomp
Operation mode 3I
0
· 3U
0
· cosφ
1. Set the polarizing voltage to 1.2 · UNRel> and the phase angle between
voltage and current to the set characteristic angle ( RCADir ), the current
lagging the voltage.
2. Measure that the operate power is equal to the SN> setting for the set
directional element.
Note that for operation, both the injected current and voltage must be greater
than the set values
INRel> and UNRel> respectively.
The function activates the START and STDIRIN outputs.
3.
Measure with angles
j
= RCADir +/- 45° that the measuring element operates
when 3I
0
· 3U
0
· cos ( RCADir -
j
) = 3I0 · 3U0 · cos(+/-45) = SN> .
4. Compare the result with the set value. Take the set characteristic into
consideration, see figure
94 and figure 95 .
5. Measure the operate time of the timer by injecting 1.2 · UNRel> and a current
to get two times the set SN> operate value.
Section 15
1MRK 502 029-UEN A
Verifying settings by secondary injection
176
Installation and commissioning manual