ABB RELION 650 SERIES, Руководство по установке

Страница: 27 / 74

5.3.1.2 Mounting procedure for flush mounting
M11942-2 v5
1
5
6
3
IEC16000080=1=en.vsd
2
4
IEC16000080 V1 EN-US
Figure 3: Flush mounting details.
PosNo Description Quantity Type
1 Sealing strip, used to obtain IP54
class. The sealing strip is factory
mounted between the case and
front plate.
- -
2 Fastener 2 -
3 Groove - -
4 Screw 4 M3x8 mm
5 Joining point of sealing strip - -
6 Panel - -
5.3.2 19” panel rack mounting
IP10313-1 v1
5.3.2.1 Overview
SEMOD127656-5 v4
The IED can be mounted in a standard 19” cubicle rack by using a mounting kit consisting of
two mounting angles and their fastening screws.
The mounting angles are reversible which enables mounting of the IED either to the left or the
right side of the cubicle.
A separately ordered rack mounting kit for side-by-side mounted IEDs or IEDs
together with RHGS cases should be selected so that the total size equals 19”.
1MRK 514 027-UEN D Section 5
Mounting
650 series 21
Installation manual
© Copyright 2017 ABB. All rights reserved